Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Shotgun Tools

Ready to buy Shotgun Tools? Brownells.com carries the widest selection at the best prices on the web. We've got 140 Shotgun Tools, from $2.95 to $829.99, meaning your search is over. We carry the best gun parts and gunsmith tools around, and we're category experts. Here's how we've become the number one online retailer in the industry: great products, great prices, and unparalleled customer service. Your satisfaction is our top priority, so we offer a 100% satisfaction guarantee on all of our products. If you're not completely satisfied with your Shotgun Tools, give us a call right away and we'll make it right. It's easy to browse our complete selection of Shotgun Tools. When you find what you're looking for, place an order online or call us at 1-800-741-0015. Our knowledgeable staff is always here to help meet all your gun parts and gunsmith needs, so never hesitate to ask a question. By email, by phone, or by smoke signal - we're here to help you aim true.

Showing 25-36 of 140
  1. Shotgun Magazine Corkscrew - Magazine Corkscrew
    Item#:
    590-020-000  
    Our Price:
    $22.99
    Description:
    Safely removes even stubborn spring retainers. Threads into popular pump and semi-auto shotgun magazine spring retainers - puts an end to ''''flying'''' springs and bent retainers. Mfg: Tom Menck SPECS: Approximately 3'''' (7.62cm) long, blued, case-hardened steel. Retainer hole must be ¼'''' (6.35mm) minimum.
  2. 870/1100 Carrier Pivot Slave Pin - Carrier Pivot Slave Pin
    Item#:
    080-870-204  
    Our Price:
    $12.99
    Description:
    Greatly simplifies assembly of the “Fire Control Assembly.” ­Tapered “nose” lines up Carrier, Carrier Dog Washer and ­Trigger Plate. Carrier Pivot Tube follows the Slave Pin through and into place. Mfg: Brownells
  3. Magazine Tube/Cap Pliers - Mag Tube/Cap Plier Pads, Pair W/Pins
    Item#:
    915-529-305  
    Our Price:
    $9.99
    Description:
    Puts an end to gouged, scratched and ruined magazine tubes and caps. These slip-joint pliers adjust to fit them all and the curved, cushioned jaws grip tight without marring. Extra long for good turning leverage. Pads are replaceable. Mfg: Cooper Power Tools SPECS: 9¼'''' (24.3cm) long. Steel. 10½'''' oz. (297.6g). Adjust from ½'''' (12.7mm) to 2½'''' (6.3cm).
  4. #226 Bead Sight Reamer
    Item#:
    579-226-000  
    Our Price:
    $6.99
    Description:
    Tapers and deburrs after drilling hole for Marble #223 Mid-Rib Shotgun Bead. Mfg: Marble Arms SPECS: Steel. 1'''' (25mm) long, 1/8'''' (3.2mm) diameter.
  5. Shotgun Barrel Polishing Flex Hone® - Flex Hone® 12 Gauge Chamber
    Item#:
    080-608-512  
    Our Price:
    $52.99
    Description:
    Puts Finish Polish On Shotgun Bores That Is Truly Outstanding
  6. All Diameter Shotgun Sight Installer - Small All Diameter Sight Installer
    Item#:
    080-000-093  
    Our Price:
    $19.99
    Description:
    Headache-saving tool includes an adjustable, spring steel collet that positively and delicately holds the globe of the sight for easy, damage-free installation. The spring steel is gentle on the sight beads, plus stands up to repeated use for a long service life. A Brownells screwdriver handle improves your control to tightly screw in the sights without damage to them or the barrel. Available in Small and Large to accommodate practically any sized sight bead. Mfg: Brownells SPECS: Plastic handle, spring steel collet. Small - 1'''' (2.54cm) diameter handle. Installs sight beads with diameters between .050'''' (1.3mm) to .125'''' (3.2mm). Large - 1-7/64'''' (2.82cm) diameter handle. Installs sight beads with diameters between .115'''' (2.9mm) to .188'''' (4.8mm).
  7. Choke Tube Speed Wrench - 12 Ga. Tube Wrench
    Item#:
    129-070-012  
    Our Price:
    $28.99
    Description:
    Aluminum fingers accurately align the wrench inside the tube and hold the teeth in place. Crank handle quickly spins tubes in or out. Universal wrench fits all factory choked shotguns and Briley X-2 tubes. (Will not fit Briley special thinwall tubes.) Mfg: Briley SPECS: Plastic knob, aluminum fingers and handle, stainless steel body. 12 ga. and 20 ga.
  8. Remington 870 Rivet Staking Tool Set - Rivet Stake Tool Set
    Item#:
    080-612-000  
    Our Price:
    $29.99
    Description:
    Two specially ground punches make fitting the 870 ejector spring and housing onto Remingtons' unique 2-step rivet a snap! The hole in the face of the #1 tool allows you to fasten the ejector housing to the receiver with the lower portion of the rivet. The #2 tool is then used to secure the ejector spring within the ejector housing with the upper portion of the rivet. Deluxe Kit combines the above two punches with an ejector spring rivet cutter that lets you take off just the peened area of the front rivet. Often lets you re-peen the existing rivet. Mfg: Brownells SPECS: Punches - Hardened steel, blue finish. 2 punches, each 3-½'''' (8.8cm) long. Rivet Cutter - Steel shaft and hardened steel cutter. 2-½'''' (6.3cm) long, .31'''' (7.8mm) shaft diameter, .143'''' (3.6mm) cutter diameter.
  9. 870/1100 Magazine Spring Retainer - Spring Retainer Tool
    Item#:
    080-187-203  
    Our Price:
    $43.99
    Description:
    Internal taper on the sleeve guides spring into position without damaging spring, gun or yourself. (Especially critical with new-production heavier springs.) Fits all Rem. 870 and Pre-'87 1100s. Mfg: Brownells SPECS: 7'''' (17.8cm) long overall, 1¼'''' (3.7cm) diameter plastic handle. Retainer sleeve has 1.08'''' (2.7cm) I.D.
  10. Rem 870/1100/11-87 Silver Bullet - Silver Bullet
    Item#:
    100-003-626  
    Our Price:
    $11.95
    Description:
    Convenient tool for removing/reinstalling the trigger plate bushing/carrier tube and carrier/dog/washer assembly. CNC machined from stainless steel, this tool makes replacement and maintenance of the carrier assembly a much easier task. Mfg: Vang Comp Systems SPECS: Stainless steel, natural finish. 3” (7.6cm) long. Fits Rem 870/1100/11-87.
  11. Remington 870 Ejector Spring Rivet Cutter - Ejector Rivet Cutter
    Item#:
    080-000-040  
    Our Price:
    $40.99
    Description:
    Hollow-end mill fits in drill press, spot faces the front rivet to take off just the peened area. Often lets you re-peen the existing rivet and eliminate rebluing the receiver. Mfg: Brownells SPECS: Steel shaft, hardened steel cutter. 2½'''' (6.3cm) long, .31'''' (7.8mm) shaft diameter. .143'''' (3.6mm) cutter diameter.
  12. Reamer/Tap Bushings - Manson Blank Bushing
    Item#:
    513-040-750  
    Our Price:
    $15.99
    Description:
    Precision ground, same bushing fits reamer and tap. Turn blank bushing to fit odd diameters. Mfg: Clymer SPECS: Bronze. 2'''' (5cm) long.
View All Shotgun Tools »