Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Bravo Company

Looking for Bravo Company? You'll find the best selection and prices everyday at Brownells.com. Here you'll find 134 Bravo Company, the best selection online, ranging in price from $6.95 to $2,495.00. We carry the best gun parts and gunsmith tools around, and we're category experts. Here's how we've become the number one online retailer in the industry: great products, great prices, and unparalleled customer service. We stand behind every item we sell, because we work with guns, too. We're happy to offer a 100% satisfaction guarantee - if you're not completely satisfied with your purchase, we'll make it right. So check out our complete selection of Bravo Company and place your order online or by calling us toll free at 1-800-741-0015. Our knowledgeable staff is always here to help meet all your gun parts and gunsmith needs, so never hesitate to ask a question. By email, by phone, or by smoke signal - we're here to help you aim true.

Showing 1-12 of 134
  1. Bravo Company 100-016-335 Ar-15/M16 Quick Detach Receiver End Plate
    Item#:
    100-016-335  
    Our Price:
    $16.99
    Description:
    This BCM Receiver End Plate features a Quick Disconnect (QD) swivel, is machined from steel, and easily accommodates staking. Mfg: Bravo Company SPECS: Made in the USA and machined from steel.
  2. Bravo Company 100-013-641 Ar-15 Mod-3 Gunfighter Grip
    Item#:
    100-013-641  
    Our Price:
    $17.99
    Description:
    Reduced angle, ergonomically enhanced grips are designed to improve rifle control for shooters preferring the modern, “squared off” stance. Constructed of durable, impact-resistant polymer, they feature a texturized surface for a sure-hold and a water-resistant, hinged door that opens to reveal a small compartment capable of storing batteries or other small items. Two included modular triggerguard inserts (smooth and extended) may be used to close the gap between the triggerguard and grip depending on your preference; inserts also work well on rifles with larger triggerguards.  Mfg: Bravo Company SPECS: Impact resistant polymer, Black or Flat Dark Earth. Mounting hardware included. Fits rifles that accept standard AR-15/M16 grips.
  3. Bravo Company 100-018-075 Ar-15 Keymod Rail Panel Kit 5-Pack Rubber
    Item#:
    100-018-075  
    Our Price:
    $9.95
    Description:
    Made to fit ALL KeyMod mounting surfaces with seven (7) consecutive KeyMod Slots.  Ultra-slim and radiused surface to allows a “round” handguard feeling, from an Octagonal profile.  Aggressive Non-Slip or Non-Reflective surface.  Ventilated for cooling.  Bi-directional. Locking tabs on either end, depending which direction they are installed.  Measurements: Length 5.550”, Width 0.625 ”, Thickness 0.100”  Can be cut to any length, depending on users requirements.  Made in the U.S.A. of a high-strength polymer material.  Each Kit contains Five (5) matching color KeyMod P Mfg: Bravo Company SPECS: Length: 5.550", Width: .625", Thickness: .100", 5 Pack.
  4. Bravo Company 100-014-185 Ar-15/M16 Mil-Spec Buffer Tube Assembly
    Item#:
    100-014-185  
    Our Price:
    $57.99
    Description:
    Compatible with Mil-Spec stocks, this kit contains all the necessary parts to mount a stock assembly onto your lower receiver. Six position buffer tube is machined from 7075 T6 aluminum to Mil-Spec dimensions with a Type III hardcoat anodized finish. Machined, high carbon steel castle nut is heat treated for extra strength and given a phosphate finish for durability. Kit also contains a standard 3 oz. carbine buffer and a carbine action spring made of high-tensile steel. Mfg: Bravo Company SPECS: Buffer Tube - 7075-T6 aluminum, hard coat anodized Type III finish. Carbine Buffer - 3 oz. (85g) wt. Castle Nut - Steel. Carbine Spring - High-tensile steel.
  5. Bravo Company 100-015-296 Keymod Quick Detachable Sling Mount
    Item#:
    100-015-296  
    Our Price:
    $17.99
    Description:
    Low-profile, all-steel, detachable sling mount is designed for use with standard KeyMod mounting holes and rails. Bearing cups are cut near the bottom edge of the mount, letting the swivel set as deeply as possible through the KeyMod holes. Streamlined mount helps increase mobility while decreasing the "snag" factor. Mount accepts standard push button QD sling swivels. Requires three KeyMod attachment hole mounting points. Includes Torx wrench for installation. Mfg: Bravo Company SPECS: Hardened steel, matte black. 1.25" (3.2cm) long, 0.6" (1.6cm) wide. 0.3 oz. (8.5g) wt.
  6. Bravo Company 100-020-758 M16 5.56 Bolt Carrier Group
    Item#:
    100-020-758  
    Our Price:
    $169.00
    Description:
    BCM® (MPI) complete bolt carrier group is fully assembled. (BCG) Bolt carrier group (auto version) for your AR15, M16, or M4. Parkerized exterior and chrome lined inside carrier. Machined to USGI specifications. This M16/M4 carrier includes the proper Mil-Spec gas key. Gas key is chrome lined and heat treated per GI specifications. Gas key is secured to carrier via USGI domestic mfg Grade 8 fasteners and properly staked per Mil-Specs. These properly hardened parts insure a strong staking and proper gas system functioning. The bolt assembly is machined from the correct Mil-Spec Carpenter No. 158® steel, shot peened for increased strength, includes tool steel machined extractor and Mfg: Bravo Company
  7. Bravo Company 100-020-761 Keymod Picatinny Rail Sections Black
    Item#:
    100-020-761  
    Our Price:
    $8.95
    Description:
    Rail section is made of Lightweight Impact Resistant Polymer. Mounting hardware is made of Corrosion Resistant Stainless Steel Made to the Mil-Standard 1913 Picatinny Arsenal Specifications. Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot) Features a Snag resistant design, while retaining Mil-Standards specs. Self-contained assembly, eliminates the possible loss of mounting hardware. Fits ALL KeyMod interface mounting surfaces. Mfg: Bravo Company
  8. Bravo Company 100-026-750 M-Lok Bcmgunfighter Short Vertical Grip
    Item#:
    100-026-750  
    Our Price:
    $18.95
    Description:
    The BCMGunfighter Vertical Grip Mod 3 M-LOK® is a lightweight variant of Bravo Company’s original Short Vertical Grip with a slim, easy-to-grasp profile that encourages the shooter to adopt a natural, comfortable wrist position. The practical benefit is less fatigue and enhanced control, especially when addressing multiple targets or engaging in rapid fire. Unlike other grips, the BCMGunfighter Vertical Grip Mod 3 M-LOK® angles slightly so it can be attached facing either toward the front or rear to accommodate the user’s preferred support hand position. Short-’n-stubby for improved mobility & reduced risk of snagging Fits any handguard wit Mfg: Bravo Company
  9. Bravo Company 100-017-597 Ar-15 Bcmgunfighter? Trigger Guard Mod-0
    Item#:
    100-017-597  
    Our Price:
    $6.95
    Description:
    BCM’s GUNFIGHTER Trigger Guard is made from impact resistant polymer and has an ergonomically correct shape and contour, without sharp edges, which enhances the shooter’s comfort. Compatible with “duck-billed” style grips. Mfg: Bravo Company SPECS: Polymer.
  10. Bravo Company 100-016-493 Keymod Bcmgunfighter Mod 3 Vertical Grip
    Item#:
    100-016-493  
    Our Price:
    $18.99
    Description:
    Low-profile length for increased mobility and decreased “snag” factor. The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle. Can be mounted in reverse angle to increase control when grabbing handguard and grip. Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations. Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces. Mfg: Bravo Company SPECS: Made in the USA and manufactured from high quality impact resistant polymers.
  11. Bravo Company 100-026-776 Bcmgunfighter M-Lok Quick Detachable Sling Mount
    Item#:
    100-026-776  
    Our Price:
    $17.95
    Description:
    The Bravo Company BCMGunfighter MCMR-SM M-LOK® QD Sling Mount provides a convenient, stable, forward connection point for pushbutton sling swivels. The low-profile, snag-resistant MCMR-SM attaches easily to any handguard with M-LOK® accessory mounting slots. All steel construction Non-rotating locking interface Quick-detach sling swivel not included The BCMGunfighter MCMR-SM M-LOK® QD Sling Mount is compatible with Bravo Company QD swivels or any standard pushbutton, quick detach swivel. Mfg: Bravo Company
  12. Bravo Company 100-023-828 Bcmgunfighter Qd Stainless Steel Sling Swivel
    Item#:
    100-023-828  
    Our Price:
    $13.95
    Description:
    Bravo Company designed their BCMGunfighter Stainless Steel QD Sling Swivel to be exceptionally strong and able to stand up to prolonged use in hostile weather conditions. Flats machined on to the sides of the body help you grasp it between your fingers as you operate the release with your thumb. The BCMGunfighter Stainless Steel QD Sling Swivel accepts any 1-1/4" wide nylon web sling. Its other features include: Body & plunger both made of 416 stainless steel Bail made of 302 stainless steel 4 chromed stainless steel ball bearings for ultra-smooth operation Tumble deburred and sand-blasted before plating, so it won’t abrade the hand or snag on Mfg: Bravo Company
View All Bravo Company »