Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Brownells Power Tools & Accessories

Ready to buy Brownells Power Tools & Accessories? Brownells.com carries the best selection at the lowest prices around. We've got 122 Brownells Power Tools & Accessories, from $3.99 to $129.99, meaning your search is over. As the internet's top seller of gun parts and gunsmith tools, we're able to bring you the best products, excellent prices, and reliable customer service every day. We love the products we sell, and we know you will, too. We provide a 100% satisfaction guarantee with all of our products, so if you're not satisfied with your Brownells Power Tools & Accessories for any reason, let us know right away. Our entire inventory of Brownells Power Tools & Accessories is online, so it's easy to find what you need. When you're ready to order, use our simple cart or call us toll-free at 1-800-741-0015. Brownells.com is dedicated to helping you find the gun parts and gunsmith tools you need, so don't hesitate to drop us a line if you have any questions.

Showing 1-12 of 122
  1. Tin Coated Drill - #31 Drill
    Item#:
    361-651-031  
    Our Price:
    $8.99
    Description:
    TiN COATED DRILL Mfg: Brownells SPECS: Jobber length.
  2. Carbide Front Sight Dovetail Cutter - 65°carbide Front Sight Dovetail Cutter
    Item#:
    080-621-963  
    Our Price:
    $49.99
    List Price: $69.99
    Description:
    Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark, Ed Brown, Bob Marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. CAUTION: For use in milling machine only. Solid carbide resists wear and easily cuts through even hardened steels. .300'''' (7.3mm) dia. cut, 3⁄8'''' (9.5mm) dia. shank. 60° or 65° shoulder. Mfg: Brownells
  3. 1911 Carbide Dovetail Sight Base Cutter - Carbide Lo-Mount Sight Base Cutter
    Item#:
    080-621-965  
    Our Price:
    $90.99
    Description:
    These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the Wichita and Novak Lo-Mount 1911 Auto sights. Use ¼'''' carbide end mill to remove the bulk of the material (see drawing above) then make final dovetail cut. Final cut to lower rear of slide is done with an end mill and is not a part of the sight base cut. Made slightly undersized to compensate for variations in sight bases and milling tolerances on installation. With the popularity of custom 1911 Auto Pistols, this cutter is one that you will use frequently in your custom work. CAUTION: For use in milling machine only. Much harder and longer-lasting than HSS cutter. U Mfg: Brownells
  4. Solid Carbide Drill - #31 Solid Carbide Drill
    Item#:
    080-660-031  
    Our Price:
    $29.99
    Description:
    For Hard Receivers
  5. Carbide Standard Sight Base Cutter
    Item#:
    080-621-060  
    Our Price:
    $79.99
    Description:
    Universal Sight Base Cutter made for sights with 60° shoulder and a 3⁄8'''' base. Cuts most standard front and rear rifle sights as well as 1911 Auto low-mount, adjustable sights like E.E.A. Super Sights, Millett and current Bo-Mar. Cutter is slightly undersized at .359'''' which requires that you make two cutting passes to compensate for factory variations in sight manufacture and milling tolerances. Designed with proper relief for maximum strength and clean cutting. CAUTION: For use in milling machine only. Solid carbide. 2'''' (5cm) long. 3⁄8'''' (9.5mm) diameter shank. 60° shoulder. Mfg: Brownells
  6. Carbide Front Sight Dovetail Cutter - 60°carbide Front Sight Dovetail Cutter
    Item#:
    080-621-960  
    Our Price:
    $69.99
    Description:
    Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark, Ed Brown, Bob Marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. CAUTION: For use in milling machine only. Solid carbide resists wear and easily cuts through even hardened steels. .300'''' (7.3mm) dia. cut, 3⁄8'''' (9.5mm) dia. shank. 60° or 65° shoulder. Mfg: Brownells
  7. Cryo-Treated Dovetail Cutter - 65° X .330"
    Item#:
    080-000-275  
    Our Price:
    $41.99
    Description:
    We’ve taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we’ve added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break. Mfg: Brownells SPECS: Cryo-treated, high-speed steel.
  8. Carbide Semi-Auto Pistol Sight Base Cutter - 60°carbide Semi-Auto Sight Base Cutter
    Item#:
    080-621-066  
    Our Price:
    $85.99
    Description:
    Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like Wichita Hi-Mount, older Bo- Mar and others with a 65° shoulder. Some makers use a 60° dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the Standard Sight Base Cutter shown on this page. Actual cutting diameter is  .330'''' so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. CAUTION: For use in milling machine only. Solid carbide cutter resists wear when cutting pistol Mfg: Brownells
  9. Tin Coated Drill - #28 Drill
    Item#:
    361-651-028  
    Our Price:
    $9.99
    Description:
    TiN COATED DRILL Mfg: Brownells SPECS: Jobber length.
  10. Carbide Semi-Auto Pistol Sight Base Cutter - 65°carbide Semi-Auto Sight Base Cutter
    Item#:
    080-621-065  
    Our Price:
    $89.99
    Description:
    Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like Wichita Hi-Mount, older Bo- Mar and others with a 65° shoulder. Some makers use a 60° dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the Standard Sight Base Cutter shown on this page. Actual cutting diameter is  .330'''' so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. CAUTION: For use in milling machine only. Solid carbide cutter resists wear when cutting pistol Mfg: Brownells
  11. Short, Piloted Barrel Liner Drill - Barrel Liner Drill, Fits .22 Rf, Drill Diameter 8mm
    Item#:
    361-504-008  
    Our Price:
    $63.99
    Description:
    If you can silver solder or braze your own extension onto a Liner Drill, these standard length, deep hole drills can save you money. Piloted to follow the original bore and have all the same high-grade features as our .22 Liner Drill: Deep hole flute geometry and special helix angle to prevent jamming; reinforced web for accurate hole dimensions; nitrided lands for long life. Mfg: Brownells SPECS: High speed steel. Pilot diameter/overall length; .22 - .215"/9.5", .25-20 - .248"/11", .32-20 - .302"/11.6".
  12. Solid Carbide End Mills - 1/8" (3.17mm) Dia. 1.5" (3.8cm) Overall
    Item#:
    317-000-004  
    Our Price:
    $20.99
    Description:
    The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with dovetail cutter.) Gives extended tool life when used in softer metals. 3/16'''' diameter is the right cutter to use when converting Remington M-700 bolts to accept Sako-style extractors. Mfg: Brownells SPECS: Hardened carbide steel cutters. Available in 3/16'''' (4.7mm) diameter shank with 5/8'''' cut length or ¼'''' (6.35mm) diameter shank with ¾'''' cut length. 4-flute.
View All Brownells Power Tools & Accessories »