Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Starrett Measuring Tools

Looking to buy Starrett Measuring Tools? Brownells.com is your source for the best prices and widest selection anywhere. Here, you'll find 15 Starrett Measuring Tools, the best available, at prices from $55.99 to $369.99. As the internet's top seller of gun parts and gunsmith tools, we're able to bring you the best products, excellent prices, and reliable customer service every day. Your satisfaction is our top priority, so we offer a 100% satisfaction guarantee on all of our products. If you're not completely satisfied with your Starrett Measuring Tools, give us a call right away and we'll make it right. Shop our inventory of Starrett Measuring Tools and place your order on the web or over the phone. We're here to provide you with all the gun parts and gunsmith tools and information you need, so - if you don't find what you're looking for online - give us a call!

Showing 1-12 of 15
  1. #134 Cross-Test Level - Cross-Test Level
    Item#:
    827-505-690  
    Our Price:
    $55.99
    Description:
    Cross-test level has two vials at right angles for cross-test leveling without moving the tool, plus, a plumb level at the top for checking squareness. An accurate, well-made and reliable tool. It is ideal for setting up machinery and doing sight work. Very compact; a perfect pocket tool. Mfg: Starrett SPECS: 2'''' (5.1cm) x 3'''' (7.6cm) x 1/2'''' (5.1mm) thick. Weighs 3 oz. (85.0g). Satin chrome.
  2. 6" Dial Caliper - White Face Caliper
    Item#:
    827-559-100  
    Our Price:
    $258.99
    Description:
    A precision tool that handles all the required measurements; inside, outside, depth and steps. Stainless steel frame and slide, including the ''''down-pointing'''' rack teeth that shed dirt and chips. Dial registers .100'''' per revolution, the wide graduations give fast, easy reading. Available with a White Face with black marks, Black Face with white marks or Red Face with white marks. Satin finish with deep, recessed, black-filled scale markings. Fast adjusting thumb wheel. Knurled lock for jaw and dial. Mfg: Starrett SPECS: 9'''' (22.9cm) long. 3'''' (7.6cm) high. 1-3/8'''' (3.5cm) diameter dial. 10'''' (25.4cm) x 4'''' (10.2cm) x 1'''' (2.5cm) padded, plastic case.
  3. 6' Electronic Caliper - Starrett 6   Electronic Caliper
    Item#:
    749-008-013  
    Our Price:
    $172.99
    Description:
    6" electronic calipers are lightweight, ergonomic, smooth and simple to operate Shift from inches to millimeters on the fly, shut off automatically after 5 minutes of non use but retain the last measurement taken Perfect for reloading because they are very easy to use and read Long battery life, accuracy to .0005", and very nice hard red plastic case Mfg: Starrett
  4. #98-6 Precision Level - No. 98-6 Level
    Item#:
    827-504-410  
    Our Price:
    $149.99
    Description:
    A precision instrument for setting up lathes, milling machines, drill presses, sight fixtures and more. Seasoned casting; highly-polished bearing surfaces; grooved base to handle round work; integral cross-test level. Mfg: Starrett SPECS: Movement of 1 division (.100''''-2.5mm)) on main vial is equal to an elevation of .005'''' (.13mm) per foot. Base is 6'''' (15.2cm) x 1-5/32'''' (2.9cm). Weighs 14 oz. (396.9g).
  5. 1' Electronic Outside Micrometer - Starrett 1   Electronic Outside Micrometer
    Item#:
    749-011-712  
    Our Price:
    $164.99
    Description:
    This is a .0001'''' standardoutside micrometerwith an electronic digitalreadout function. If youare not used to readingmicrometers or have troubleseeing small numbers,the digital micrometercan be a pleasure to use.This micrometer switchesfrom inches to millimeters,switches off after 30minutes but retains last reading, includes on button “hold” and “zero” functions.Runs on a large coin cell battery (#52-1120, see below right) for extra long batterylife. Includes plastic case, adjustment wrench, friction thimble (not ratchet),and battery. Mfg: Starrett
  6. Depth Attachment For Calipers - Starrett Depth Attachment For Calipers
    Item#:
    749-005-938  
    Our Price:
    $72.99
    Description:
    This attachment will fit almost all 6'''''''' dial calipers (dial type or electronic) and enable you to make accurate depth measurements or height difference measurements between surfaces. The tool attaches to the end of the caliper with a thumb screw and can be installed or removed almost instantly. Very handy if you need to know how deep a hole is. Mfg: Starrett
  7. Depth Micrometer - Starrett Depth Mic.
    Item#:
    827-523-180  
    Our Price:
    $313.99
    Description:
    Unique, flat rod fits into slots and grooves as narrow as .045" and measures depth from 0" to 3". Rotates, doesn't turn with the spindle, can't "walk" or roll off an edge. Reads to .001" ratcheting knob, base and three, hardened ground and lapped rods. Mfg: Starrett SPECS: 21/2" (6.3cm) long x .403" (10.2cm) wide base. Rods are .125" (3.2mm) wide x .0445" (1.1mm) thick. Satin, chrome plated.
  8. Dial Indicator - Starrett Dial Indicator
    Item#:
    749-007-761  
    Our Price:
    $158.99
    Description:
    Dial Indicators are primarily used by handloaders on various measuring guages. We carry several different dial indicators so you can pick the best one for your requirements and budget. All of the indicators will work on the Sinclair Concentricity Gage, the Sinclair Neck Wall Thickness Gage, and the Sinclair Neck Turning Tool Adjustment Fixture.The stem on all indicators measures three eigths inch in diameter and has 1.0 inch of travel. Each indicator reads .001 inch. The best dial indicator we offer, and probably one of the best in the world, is the Starrett dial indicator. Quality made in the United States. Mfg: Starrett
  9. Basic Electronic Tool Set - Starrett Basic Electronic Tool Set
    Item#:
    749-008-393  
    Our Price:
    $369.99
    Description:
    This is the perfect measuring tool set for new reloaders or anyone wishing to upgrade to digital electronic tools. The set includes the Starrett 6" Electronic Caliper (#52-7990) and the 1" Electronic Outside Micrometer (#52-7345) in an attractive fitted case. Batteries are included for both tools (CR2450 and SR44).Battery will have to be removed if shipping through the Postal Service and International Orders. Mfg: Starrett
  10. Electronic Indicator - Starrett Electronic Indicator
    Item#:
    749-008-023  
    Our Price:
    $136.99
    List Price: $217.99
    Description:
    This 3600 Series Electronic Dial Indicator from Starrett has simple, powerful and easy-to-use functions at a reasonable price. The LCD readout is large and east to read, range is .500 inch (half inch), buttons for power on/off, zero and reverse travel which changes the reading direction, standard three eights stem and 4-48 spindle thread. Resolution is .0005 inch, comes with a plastic storage case and uses standard SR44 batteries, the back cover has the standard indicator mounting lug. Mfg: Starrett
  11. 6" Dial Caliper - Black Face Caliper
    Item#:
    827-559-101  
    Our Price:
    $256.99
    Description:
    A precision tool that handles all the required measurements; inside, outside, depth and steps. Stainless steel frame and slide, including the ''''down-pointing'''' rack teeth that shed dirt and chips. Dial registers .100'''' per revolution, the wide graduations give fast, easy reading. Available with a White Face with black marks, Black Face with white marks or Red Face with white marks. Satin finish with deep, recessed, black-filled scale markings. Fast adjusting thumb wheel. Knurled lock for jaw and dial. Mfg: Starrett SPECS: 9'''' (22.9cm) long. 3'''' (7.6cm) high. 1-3/8'''' (3.5cm) diameter dial. 10'''' (25.4cm) x 4'''' (10.2cm) x 1'''' (2.5cm) padded, plastic case.
  12. Standard 1' Outside Micrometer - Standard 1" Outside Micrometer
    Item#:
    749-007-905  
    Our Price:
    $272.99
    Description:
    This is the same 1'''''''' micrometer you see in professional machine shops all over the world. This Starrett micrometer measures to .0001'''''''' with superb, repeatble accuracy. Ratchet stop mechanism make it easy for any user to repeat measurements, and carbide anvil faces insure a lifetime of accurate measuring. The micrometer comes with an instruction booklet for reading and adjusting the instrument, an adjustment wrench and plastic case. The 1'''''''' micrometer and 6'''''''' caliper are the basic measuring tools for reloader and shooters. Made in the USA. Mfg: Starrett
View All Starrett Measuring Tools »