Brownells 75th Anniversary - A Shooting Heritage
Menu

Metal Finishing

(72 video/articles)
  • Grid View List View
Fairtrimmers Finishing Guide
Fairtrimmers Finishing Guide

Basic Application Instructions for New or Stripped Clean & Dry Wood

Brownells Surface Hardening Compound
Brownells Surface Hardening Compound

Instructions for Brownells Surface Hardening Compound

Screw Cut Off Fixture
Screw Cut Off Fixture

This video will show you how to make a screw cut off fixture, and how to use the screw checker or screw gizzy to cut off screws also.

Replacement Pins
Replacement Pins

This video suggest a good use for broken drill bits as replacement pins.

Magna-Tip Magic
Magna-Tip Magic

This video shows you a quick and simple tip to get metal chips out of a hole.

Jack Rowe, Master Gunsmith Series, Tightening Forends.
Jack Rowe, Master Gunsmith Series, Tightening Forends.

Jack Rowe, Master Gunsmith, discusses the different types of forend latches and how to tighten them on English Shotguns.

Jack Rowe, Master Gunsmith Series, Trigger Pull. Part 2 of 3.
Jack Rowe, Master Gunsmith Series, Trigger Pull. Part 2 of 3.

Jack Rowe, Master Gunsmith, demonstrates how to measure and adjust trigger pull on English Shotguns. Part 2 of 3.

Jack Rowe, Master Gunsmith Series, Trigger Pull. Part 3 of 3.
Jack Rowe, Master Gunsmith Series, Trigger Pull. Part 3 of 3.

Jack Rowe, Master Gunsmith, demonstrates how to measure and adjust trigger pull on English Shotguns. Part 3 of 3.

Jack Rowe, Master Gunsmith, Trigger Pull. Part 1 of 3.
Jack Rowe, Master Gunsmith, Trigger Pull. Part 1 of 3.

Jack Rowe, Master Gunsmith, demonstrates how to measure and adjust trigger pull on English Shotguns. Part 1 of 3.

Jack Rowe, Master Gunsmith Series, Making a Spring. Part 1 of 3.
Jack Rowe, Master Gunsmith Series, Making a Spring. Part 1 of 3.

Jack Rowe, Master Gunsmith, demonstrates how to create a spring by hand from scratch. Part 1 of 3.

Jack Rowe, Master Gunsmith Series, Making a Spring. Part 2 of 3.
Jack Rowe, Master Gunsmith Series, Making a Spring. Part 2 of 3.

Jack Rowe, Master Gunsmith, demonstrates how to create a spring by hand from scratch. Part 2 of 3

Jack Rowe, Master Gunsmith Series, Making a Spring. Part 3 of 3.
Jack Rowe, Master Gunsmith Series, Making a Spring. Part 3 of 3.

Jack Rowe, Master Gunsmith, demonstrates how to create a spring by hand from scratch. Part 3 of 3.