The Revelation 120 was sold by Western Auto and is basically a Marlin model 60. These rifles have a rather complicated action which is difficult at best when it has to be completely disassembled.
A couple of things I recently discovered (maybe I'm just a slow learner!)
1. The Brownells #15 Barrels Vise bushings are a nearly perfect fit for holding Colt SAA barrels for removal.
A customer brought into our shop a Kimber Pro BP Ten that would not fire. The BP Ten is a double-stack, polymer framed 1911-type that was never very common and has been out of production for 5 years or so now.
I ream barrels for screw in choke tubes using a lathe. I'm sure many other gunsmiths do as well. The reamer is held in the chuck and the chamber end of the barrel is aligned using a live center.
Had a Marlin 336 come in recently that had been used as a club like so many have.
I did it again - and I suspect that others have, too. I mixed small & large (.38, 9mm & .45) cases in the tumbler. Many smaller cases ended up stuck, with polishing media, in the larger cases.
While trying to get the right color on some case hardened parts from a Ruger Mark II .22lr pistol, Oxpho Blue was giving me fits.
We have had several Stevens Favorites in the shop lately. They sometimes have broken or damaged extractor/ejectors.
A common complaint about AR15/M16 grips is that they are too small. For those of us that are waiting for an order of larger grips, a temporary solution is to buy a roll of elastic electrical tape and a roll of non-skid tape from your hardware store.
We occasionally see AR-15 lowers with one of the trigger guard mounting 'ears' broken off. This usually occurs when a customer decides to change their trigger guard or assembly their own lower.
Some time ago while I was building a rimfire tactical gun, I wanted a reliable and simple way to make very small muzzle angle changes while in the shooting position and have those changes stay as I set them while using a tripod. Then it came to me.
With all the foreign ammo for the AR available there is some that have that lacquer coating. After some rapid firing if a fresh round is left in the chamber it can literally glue itself to the wall of the chamber.
Thank you for contacting our Chat Team! Please visit us again.
If you would like a copy of the chat transcript please click "Send Transcript" below.
Hello, to begin a chat session with a customer service representative, complete the fields below and click Chat