Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Volquartsen Handgun Parts

Looking for Volquartsen Handgun Parts? Brownells.com carries the best selection at the lowest prices around. Here you'll find 51 Volquartsen Handgun Parts, the best selection online, ranging in price from $7.99 to $703.99. We're the number one online retailer of gun parts and gunsmith tools. Our success and dedication allows us to provide you with the best products, lowest prices, and excellent customer service every time. We know you'll find our Volquartsen Handgun Parts to be everything you expect, so we're proud to offer a 100% satisfaction guarantee. If you're not completely satisfied with your purchase, we'll make it right; whatever it takes. Shop our inventory of Volquartsen Handgun Parts and place your order on the web or over the phone. Our knowledgeable staff is always here to help meet all your gun parts and gunsmith needs, so never hesitate to ask a question. By email, by phone, or by smoke signal - we're here to help you aim true.

Showing 13-24 of 51
  1. Firing Pin & Exact Edge Extractor - Surestrike Firing Pin
    Item#:
    930-000-126  
    Our Price:
    $43.99
    Description:
    Fits Ruger® MKI, MKII™, & MKIII™ including 22/45™. Firing pin sold with extractor or available separately. Firing Pin EDM machined from A2 tool steel Minimizes/eliminates light hits Firing pin strike face is surface ground Firing pin is .004" wider than factory pin, new width helps eliminate side-to-side movement Hardened to RC56-58 to prevent deformation Extractor EDM machined from A2 tool steel Allows for exact tolerances Will not lose edge under impact Precise hook point is hardened to RC58-60 Mfg: Volquartsen
  2. Ruger® Mk Ii™ Tl 2000 Rear Sight - Tl 2000 Sight
    Item#:
    930-000-011  
    Our Price:
    $70.99
    Description:
    All components are CNC milled from a solid steel billet to ensure accurate, repeatable click adjustments for windage and elevation. The serrated rear leaf features a slight reverse angle to reduce glare and improve sight picture. Fully compatible with the factory front sight on Mk I and Mk II™ pistols. Fits Ruger® 22 pistols equipped with factory adjustable rear sight. No fitting required, uses factory dovetail; locks in place with two set screws. Mfg: Volquartsen SPECS: Steel, blue, matte finish. Blade - .767" (19.5mm) wide, .319" (8mm) high. Notch - .11" (2.7mm) wide, .07" (1.8mm) deep. Body - .70" (18mm) wide, 1.4" (3.6cm) long.
  3. Ruger® Mark Ii™/Mark Iii™, & 22/45™ Target Trigger - Ruger® Target Trigger
    Item#:
    930-000-123  
    Our Price:
    $45.99
    Description:
    Precision machined from billet for precise fit to cut down trigger weight and eliminate the heavy pressure required to move the factory part. Helps produce a more consistent pull for improved accuracy. Stop screw is adjustable for overtravel and pretravel with the gun fully assembled, so you get a no-creep pull. Ultra-smooth shoe offers more contact with the trigger finger. Available in Black anodized aluminum or polished stainless steel (SS). Includes trigger spring and trigger spring plunger. Mfg: Volquartsen SPECS: Aluminum, anodized, black, or stainless steel, natural silver finish. .354" (9mm) wide trigger shoe face. Fits Ruger® Mark I, Mark II™, Mark III™, and 22/45™ pistols.
  4. Exact Edge Extractor For Ruger® Mkii/Mkiii/Mkiv - Exact Edge Extractor For Ruger Mkii/Mkiii/Mkiv
    Item#:
    930-000-145  
    Our Price:
    $14.99
    Description:
    The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under impact such as other extractors made from stamped steel or titanium that will have their edges roll over and actually cause extraction problems after a short period of use. Our extractor features a very precise hook point. It is hardened to a Rc 58-60 to withstand years of use and still maintain its edge. We are able to hold the tolerances to +/-.0001" by utilizing the EDM manufacturing process. The hook is .005" closer to the rim of the cartridge to allow for the most positive extraction available. Made of A2 tool steel. Fits the complet Mfg: Volquartsen
  5. Ruger® Mark Ii™/ Mark Iii™ Volthane Pistol Grips - Rh Volthane Grips, Mark Iii&trade
    Item#:
    930-000-047  
    Our Price:
    $47.99
    Description:
    Hand-Filling Target Grips
  6. Ruger® Mk I & Mk Ii Accurizer Spring Kit - Accurizer Spring Kit
    Item#:
    930-012-004  
    Our Price:
    $11.99
    Description:
    Drop-in replacements for the factory springs give an improvement you'll feel in your finger and see on the target. Mfg: Volquartsen SPECS: Kit includes mainspring, trigger rebound spring and instructions. Fits Ruger Mk I and Mk II pistols.
  7. Ruger Mk Ii™ Target Hammer - Target Hammer
    Item#:
    930-012-003  
    Our Price:
    $50.99
    Description:
    Hardened, precision-ground, drop-in hammer lightens trigger pull by 35% on MK II™ pistols. Electro-polished to remove even minor imperfections for an ultra-smooth sear surface and a clean breaking, target-quality, trigger pull. Includes strut and pin. Mfg: Volquartsen SPECS: Machined steel, 1.05" (2.6cm) long, .56" (14mm) wide. Wt. .5 oz. (14 g). Fits Ruger® MK II™ and .22/.45™ pistols only.
  8. Ruger® Mark Ii/Iii™ Extended Bolt Release - Extended Bolt Release, Blued
    Item#:
    930-000-068  
    Our Price:
    $11.99
    Description:
    Drop-in replacement bolt release has a large, easy-to-find, contact pad with a serrated face ensures fast, positive closing of the action, especially during high-stress competition. Gives the shooter a secure, non-slip grip with or without gloves on. Replaces the factory bolt release on both Mark II and Mark III pistols in minutes. No permanent modifications required. Does not fit 22/45. Mfg: Volquartsen SPECS: Carbon steel, gloss blued, or stainless steel, silver finish. Pad is 9⁄16" (1.4mm) long x 7⁄16" (1.1mm) wide. .2 oz. (5.6g) weight. Does not fit 22/45.
  9. Ruger® Mark Ii™/ Mark Iii™ Volthane Pistol Grips - Rh Volthane Grips, Mark Ii™
    Item#:
    930-012-001  
    Our Price:
    $47.99
    Description:
    Hand-Filling Target Grips
  10. Ruger® Mark Ii/Iii™ Extended Bolt Release - Extended Bolt Release, Silver
    Item#:
    930-000-067  
    Our Price:
    $11.99
    Description:
    Drop-in replacement bolt release has a large, easy-to-find, contact pad with a serrated face ensures fast, positive closing of the action, especially during high-stress competition. Gives the shooter a secure, non-slip grip with or without gloves on. Replaces the factory bolt release on both Mark II and Mark III pistols in minutes. No permanent modifications required. Does not fit 22/45. Mfg: Volquartsen SPECS: Carbon steel, gloss blued, or stainless steel, silver finish. Pad is 9⁄16" (1.4mm) long x 7⁄16" (1.1mm) wide. .2 oz. (5.6g) weight. Does not fit 22/45.
  11. Exact Edge Extractor For S&W Model 41
    Item#:
    930-000-148  
    Our Price:
    $9.99
    List Price: $14.99
    Description:
    The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under impact such as other extractors made from stamped steel or titanium that will have their edges roll over and actually cause extraction problems after a short period of use. Our extractor features a very precise hook point. It is hardened to a Rc 58-60 to withstand years of use and still maintain its edge. We are able to hold the tolerances to +/-.0001" by utilizing the EDM manufacturing process. The hook is .005" closer to the rim of the cartridge to allow for the most positive extraction available. Made of A2 tool steel. Mfg: Volquartsen
  12. Ruger® Mark Ii™/Mark Iii™ Extended Safety - Extended Safety For Mark Ii™/Mark
    Item#:
    930-000-129  
    Our Price:
    $34.99
    Description:
    FEATURES: Extended safety works with Ruger® mark II™, III™, and mark III™ 22/45™ pistols Is .150" longer than the factory button Stainless steel or black finish Contour is wire EDM cut from 17-4 stainless steel Includes safety detent plunger and spring BENEFITS: Allows for easy safety manipulation, especially when using target grips Precision construction ensures proper fit and function Stainless steel or black finishes match your Ruger® pistol Included safety detent plunger and spring make installation simple Mfg: Volquartsen
View All Volquartsen Handgun Parts »