Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Sinclair International Turning & Expander Mandrels

Price shopping for Sinclair International Turning & Expander Mandrels? Look no further than Brownells.com for the best prices and selection. With 58 Sinclair International Turning & Expander Mandrels in stock ranging in price from $9.99 to $49.99, you'll find all the best choices available. We carry the best gun parts and gunsmith tools around, and we're category experts. Here's how we've become the number one online retailer in the industry: great products, great prices, and unparalleled customer service. We know you'll be happy with your purchase of Sinclair International Turning & Expander Mandrels from Brownells.com. We stand behind every product we sell, and we're proud to prove it with our 100% satisfaction guarantee - if you're not completely happy with your purchase, let us know right away. Shop our inventory of Sinclair International Turning & Expander Mandrels and place your order on the web or over the phone. Customer service associates are standing by to answer your questions about our gun parts and gunsmith tools. We're here to help!

Showing 1-12 of 58
  1. Generation Ii Expander Dies - 17 Thru 338 Caliber Expander Die Body
    Item#:
    749-011-715  
    Our Price:
    $29.99
    Description:
    Our Generation II Expander Dies completely capture the mandrel within the die so the mandrel cannot pull out. An O-ring in the die cap allows the mandrel to float a bit and find its own center within the case neck. All three Generation II dies are precision machined from stainless steel and the 7/8 inch - 14 dies include the Sinclair Stainless Steel Split Lock Ring. Large caliber expander dies accept only 35 to 50 caliber mandrels. All expander mandrels for Sinclair Expander Bodies are sold separately: Find Mandrels here. Mfg: Sinclair International
  2. Stainless Steel Expander Mandrels - 6.5mm (.263") Stainless Expander Mandrel
    Item#:
    749-001-179  
    Our Price:
    $9.99
    Description:
    Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002'''''''' less than the bullet diameter for the caliber. Our expander mandrels are made .001'''''''' larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the m Mfg: Sinclair International
  3. Stainless Steel Expander Mandrels - 30 Caliber (.307") Stainless Expander Mandrel
    Item#:
    749-001-183  
    Our Price:
    $9.99
    Description:
    Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002'''''''' less than the bullet diameter for the caliber. Our expander mandrels are made .001'''''''' larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the m Mfg: Sinclair International
  4. Stainless Steel Expander Mandrels - 22 Caliber (.223") Stainless Expander Mandrel
    Item#:
    749-001-187  
    Our Price:
    $9.99
    Description:
    Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002'''''''' less than the bullet diameter for the caliber. Our expander mandrels are made .001'''''''' larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the m Mfg: Sinclair International
  5. Stainless Steel Expander Mandrels - 6mm (.242") Stainless Expander Mandrel
    Item#:
    749-001-182  
    Our Price:
    $9.99
    Description:
    Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002'''''''' less than the bullet diameter for the caliber. Our expander mandrels are made .001'''''''' larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the m Mfg: Sinclair International
  6. Stainless Steel Neck Turning Mandrels - 6.5mm (.262") Stainless Neck Turning Mandrel
    Item#:
    749-001-180  
    Our Price:
    $9.99
    Description:
    Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the man Mfg: Sinclair International
  7. Stainless Steel Expander Mandrels - 7mm (.283") Stainless Expander Mandrel
    Item#:
    749-001-176  
    Our Price:
    $9.99
    Description:
    Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002'''''''' less than the bullet diameter for the caliber. Our expander mandrels are made .001'''''''' larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the m Mfg: Sinclair International
  8. Stainless Steel Neck Turning Mandrels - 30 Caliber (.306") Stainless Neck Turning Mandrel
    Item#:
    749-001-184  
    Our Price:
    $9.99
    Description:
    Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the man Mfg: Sinclair International
  9. Carbide Neck Turning Mandrels - 6.5mm (.262") Carbide Neck Turning Mandrel
    Item#:
    749-006-110  
    Our Price:
    $49.99
    Description:
    Sinclair stainless steel neck turning mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002" under bullet diameter. The shape and surface of all of our mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbide stock, which yields even closer tolerances. All Carbide mandrels are ground to .002" under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. Large caliber (35 to 50 caliber) mandrels fit only Mfg: Sinclair International
  10. Stainless Steel Neck Turning Mandrels - 6mm (.241") Stainless Neck Turning Mandrel
    Item#:
    749-001-186  
    Our Price:
    $9.99
    Description:
    Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the man Mfg: Sinclair International
  11. Stainless Steel Neck Turning Mandrels - 22 Caliber (.222") Stainless Neck Turning Mandrel
    Item#:
    749-001-185  
    Our Price:
    $9.99
    Description:
    Sinclair stainless steel neck turning and expander mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002 inch under bullet diameter and expander mandrels are .001 inch under bullet diameter. The shape and surface of all mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbdie stock, which yields even closer tolerances. All carbide mandrels are ground to.002 inch under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the man Mfg: Sinclair International
  12. Stainless Steel Expander Mandrels - 338 Caliber (.337") Stainless Expander Mandrel
    Item#:
    749-001-158  
    Our Price:
    $9.99
    Description:
    Our neck turning tool mandrels are made from high grade stainless steel on Precision turning centers. The shape, finish, and size are the result of years of use and experimentation by many hand loaders. All of our mandrels fit both our NT-3000 and NT-1000 neck turning tools and most of our older model neck turning tools. Our neck turning tool mandrels measure approximately about .002'''''''' less than the bullet diameter for the caliber. Our expander mandrels are made .001'''''''' larger than the turning mandrels. Using an expander mandrel prior to neck turning sizes the case to fit the neck turning mandrels perfectly. This correct fit makes the turning process more precise and much easier. Any of the m Mfg: Sinclair International
View All Sinclair International Turning & Expander Mandrels »