Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Bullet Casting

Ready to buy Bullet Casting? Look no further than Brownells.com for the best prices and selection. With 569 Bullet Casting in stock ranging in price from $5.99 to $469.99, you'll find all the best choices available. As the internet's top seller of gun parts and gunsmith tools, we're able to bring you the best products, excellent prices, and reliable customer service every day. We stand behind every item we sell, because we work with guns, too. We're happy to offer a 100% satisfaction guarantee - if you're not completely satisfied with your purchase, we'll make it right. So check out our complete selection of Bullet Casting and place your order online or by calling us toll free at 1-800-741-0015. As always, we're here to help meet all of your needs for gun parts and gunsmith tools, so if you don't find what you're looking for online, drop us a line and let us know.

Showing 25-36 of 569
  1. Lube-A-Matic-2 Bullet Sizer/Lubricator
    Item#:
    749-014-238  
    Our Price:
    $209.99
    Description:
    Size and Lubricate cast bullets in one stop with the Lube-A-Matic-2. Just insert a bullet in the sizer die and pull the handle. A sized and lubricated bullet ejects on the upstroke. A fingertip regulator lets you fine-tune lubricant flow. The Lube-A-Matic-2 also seats gas checks. A high quality tool that's a "must-have" item for the serious bullet caster. Size Die and Top Punch sold separately. Mfg: Rcbs
  2. Cast Bullet Lube & Size Kits - .357" Bullet Lube & Size Kit
    Item#:
    100-100-597  
    Our Price:
    $23.99
    Description:
    Lee Bullet Lube & Size Kits are the fastest and easiest way to lubricate and size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press not included. Bullet Lube Sold Separately *Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To cri Mfg: Lee Precision
  3. Production Pot Iv - Lee Production Pot Iv
    Item#:
    100-010-155  
    Our Price:
    $75.99
    Description:
    Large, deep pot holds approximately 10 pounds of lead. Melt time is less than 20 minutes. Pour spout up front where it belongs so you can see what you're doing. Infinite heat control. Uses only 500 watts of power during heat-up and a lot less to maintain temperature. Large, stable base for safety. 4" of clearance under the spout is high enough to accept all brands of bullet molds and most sinker molds. Melter is capable of reaching 900 degrees Fahrenheit. Mfg: Lee Precision
  4. Precision Melter - Lee Precision Melter
    Item#:
    100-010-154  
    Our Price:
    $45.99
    Description:
    High speed melter with an infinite heat control for the serious shooter. Easily handles 4-cavity molds. Takes less than 15 minutes to melt 4 pounds of metal. Same infinite heat control as used on the Product Pot. 500 watts AC only. Mfg: Lee Precision
  5. Bullet Mould Handles - Bullet Casting Mould Handles
    Item#:
    749-014-237  
    Our Price:
    $46.99
    Description:
    Solid steel frames with extra-long, premium hardwood handles for comfort. Perfect for home bullet casting. One sixe fits all RCBS bullet moulds only. Mfg: Rcbs
  6. Lead Dipper
    Item#:
    749-014-233  
    Our Price:
    $26.99
    Description:
    A large-capacity bowl for easy scooping and stirring. The lead dipper has a tapered pouring spout to fit sprue holes and has a solid hardwood grip. Overall Length: 11-1/2 inches. Mfg: Rcbs
  7. Cast Bullet Lube & Size Kits - .309" Bullet Lube & Size Kit
    Item#:
    100-053-245  
    Our Price:
    $22.99
    Description:
    Lee Bullet Lube & Size Kits are the fastest and easiest way to lubricate and size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press not included. Bullet Lube Sold Separately *Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To cri Mfg: Lee Precision
  8. Shotgun Slug Moulds - Shotgun Slug 7/8oz. 12ga.
    Item#:
    100-100-592  
    Our Price:
    $27.99
    Description:
    Load slugs for less than standard trap loads. The Lee DRIVE KEY slug is loaded in a standard trap hull with standard wad and conventional folded crimp. Slug loads are produced with any standard shot shell reloading press. Lee Shotgun Slug Moulds feature the exclusive drive key. The drive key positively rotates the slug in rifled shotgun barrels. The key doubles as a support rib allowing use of a standard trap wad - no need for a support wad or base filler. Sabot wad design outperforms rifled slugs in rifled slug barrels. Velocity and accuracy meet and exceed expensive factory loaded rifled slugs. Molds feature self centering automatic core pins for maximum speed and convenience. Mold Mfg: Lee Precision
  9. 6 Cavity Handgun Moulds - 6-Cavity 356-125-2r 9mm/380 (.356") 125gr 2r
    Item#:
    100-053-348  
    Our Price:
    $42.99
    Description:
    The Lee 6 Cavity Handgun moulds are made for heavy duty volume production. Moulds and blocks have steel bushings and alignment pins for lasting pecision. Price includes a cam operated sprue plate to eliminate the pounding common to ordinary moulds. The sprue plate is hard anodized and held down with wave washers at each end. All Lee mould blocks are made from aluminum because of its exceptional moulding qualities. All mould cavities are CNC machined for unmatched roundness and size control. Does not include handles. Mfg: Lee Precision
  10. Cast Bullet Lube & Size Kits - .308" Bullet Lube & Size Kit
    Item#:
    100-053-244  
    Our Price:
    $22.99
    Description:
    Lee Bullet Lube & Size Kits are the fastest and easiest way to lubricate and size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press not included. Bullet Lube Sold Separately *Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To cri Mfg: Lee Precision
  11. Cast Bullet Lube & Size Kits - .430" Bullet Lube & Size Kit
    Item#:
    100-010-173  
    Our Price:
    $20.99
    Description:
    Lee Bullet Lube & Size Kits are the fastest and easiest way to lubricate and size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press not included. Bullet Lube Sold Separately *Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram. Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary. To cri Mfg: Lee Precision
  12. Rifle Moulds - Double Cavity 457-405-Hb 45-70 (.457") 405gr F
    Item#:
    100-053-444  
    Our Price:
    $21.99
    Description:
    All Lee mould blocks are made from aluminum because of its exceptional moulding qualities. All mould cavities are CNC machined for unmatched roundness and size control. All hollow base moulds are single cavity only as they have a self centering, automatic core pin for the fastest possible moulding. All moulds include handles and sprue plates. Mfg: Lee Precision
View All Bullet Casting »