Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Power Tools & Accessories

Ready to buy Power Tools & Accessories? Brownells.com carries the best selection at the lowest prices around. Our selection of 376 Power Tools & Accessories represents the best of the best, on sale at prices from $2.99 to $730.99. As the internet's top seller of gun parts and gunsmith tools, we're able to bring you the best products, excellent prices, and reliable customer service every day. Your satisfaction is our top priority, so we offer a 100% satisfaction guarantee on all of our products. If you're not completely satisfied with your Power Tools & Accessories, give us a call right away and we'll make it right. Shop our inventory of Power Tools & Accessories and place your order on the web or over the phone. Customer service associates are standing by to answer your questions about our gun parts and gunsmith tools. We're here to help!

Showing 1-12 of 376
  1. Wire Gauge Drills - Jobber Length - 31j .1200"
    Item#:
    891-131-120  
    Our Price:
    $5.99
    Description:
    A heavy-duty drill can make all the difference in the world in your work. The extra engineering and care in manufacture will help you to drill cleaner, more accurate holes, and many more of them at that. All the Drills we carry, Sets, Individuals, Jobber Length and Short Length, are made from High Speed Steel with a 135° self-centering point. Special point and surface treatments (Maxi-Set not treated) give easier, more wear-resistant drilling of the tough steels encountered in the gun shop. Mfg: Triumph Twist Drill Co. SPECS: High speed steel.
  2. Tin Coated Drill - #31 Drill
    Item#:
    361-651-031  
    Our Price:
    $8.99
    Description:
    TiN COATED DRILL Mfg: Brownells SPECS: Jobber length.
  3. Wire Gauge Drills - Short Length - 31s .1200"
    Item#:
    891-431-120  
    Our Price:
    $4.99
    Description:
    A heavy-duty drill can make all the difference in the world in your work. The extra engineering and care in manufacture will help you to drill cleaner, more accurate holes, and many more of them at that. All the Drills we carry, Sets, Individuals, Jobber Length and Short Length, are made from High Speed Steel with a 135° self-centering point. Special point and surface treatments (Maxi-Set not treated) give easier, more wear-resistant drilling of the tough steels encountered in the gun shop. Mfg: Triumph Twist Drill Co. SPECS: High speed steel.
  4. Carbide Front Sight Dovetail Cutter - 65°carbide Front Sight Dovetail Cutter
    Item#:
    080-621-963  
    Our Price:
    $49.99
    List Price: $69.99
    Description:
    Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark, Ed Brown, Bob Marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. CAUTION: For use in milling machine only. Solid carbide resists wear and easily cuts through even hardened steels. .300'''' (7.3mm) dia. cut, 3⁄8'''' (9.5mm) dia. shank. 60° or 65° shoulder. Mfg: Brownells
  5. Wire Gauge Drills - Jobber Length - 54j .0550"
    Item#:
    891-154-055  
    Our Price:
    $5.99
    Description:
    A heavy-duty drill can make all the difference in the world in your work. The extra engineering and care in manufacture will help you to drill cleaner, more accurate holes, and many more of them at that. All the Drills we carry, Sets, Individuals, Jobber Length and Short Length, are made from High Speed Steel with a 135° self-centering point. Special point and surface treatments (Maxi-Set not treated) give easier, more wear-resistant drilling of the tough steels encountered in the gun shop. Mfg: Triumph Twist Drill Co. SPECS: High speed steel.
  6. 1911 Carbide Dovetail Sight Base Cutter - Carbide Lo-Mount Sight Base Cutter
    Item#:
    080-621-965  
    Our Price:
    $90.99
    Description:
    These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the Wichita and Novak Lo-Mount 1911 Auto sights. Use ¼'''' carbide end mill to remove the bulk of the material (see drawing above) then make final dovetail cut. Final cut to lower rear of slide is done with an end mill and is not a part of the sight base cut. Made slightly undersized to compensate for variations in sight bases and milling tolerances on installation. With the popularity of custom 1911 Auto Pistols, this cutter is one that you will use frequently in your custom work. CAUTION: For use in milling machine only. Much harder and longer-lasting than HSS cutter. U Mfg: Brownells
  7. Carbide Standard Sight Base Cutter
    Item#:
    080-621-060  
    Our Price:
    $79.99
    Description:
    Universal Sight Base Cutter made for sights with 60° shoulder and a 3⁄8'''' base. Cuts most standard front and rear rifle sights as well as 1911 Auto low-mount, adjustable sights like E.E.A. Super Sights, Millett and current Bo-Mar. Cutter is slightly undersized at .359'''' which requires that you make two cutting passes to compensate for factory variations in sight manufacture and milling tolerances. Designed with proper relief for maximum strength and clean cutting. CAUTION: For use in milling machine only. Solid carbide. 2'''' (5cm) long. 3⁄8'''' (9.5mm) diameter shank. 60° shoulder. Mfg: Brownells
  8. Wire Gauge Drills - Jobber Length - 28j .1405"
    Item#:
    891-128-140  
    Our Price:
    $5.99
    Description:
    A heavy-duty drill can make all the difference in the world in your work. The extra engineering and care in manufacture will help you to drill cleaner, more accurate holes, and many more of them at that. All the Drills we carry, Sets, Individuals, Jobber Length and Short Length, are made from High Speed Steel with a 135° self-centering point. Special point and surface treatments (Maxi-Set not treated) give easier, more wear-resistant drilling of the tough steels encountered in the gun shop. Mfg: Triumph Twist Drill Co. SPECS: High speed steel.
  9. Solid Carbide Drill - #31 Solid Carbide Drill
    Item#:
    080-660-031  
    Our Price:
    $29.99
    Description:
    For Hard Receivers
  10. Carbide Semi-Auto Pistol Sight Base Cutter - 60°carbide Semi-Auto Sight Base Cutter
    Item#:
    080-621-066  
    Our Price:
    $85.99
    Description:
    Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like Wichita Hi-Mount, older Bo- Mar and others with a 65° shoulder. Some makers use a 60° dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the Standard Sight Base Cutter shown on this page. Actual cutting diameter is  .330'''' so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. CAUTION: For use in milling machine only. Solid carbide cutter resists wear when cutting pistol Mfg: Brownells
  11. Wire Gauge Drills - Jobber Length - 45j .0820"
    Item#:
    891-145-082  
    Our Price:
    $5.99
    Description:
    A heavy-duty drill can make all the difference in the world in your work. The extra engineering and care in manufacture will help you to drill cleaner, more accurate holes, and many more of them at that. All the Drills we carry, Sets, Individuals, Jobber Length and Short Length, are made from High Speed Steel with a 135° self-centering point. Special point and surface treatments (Maxi-Set not treated) give easier, more wear-resistant drilling of the tough steels encountered in the gun shop. Mfg: Triumph Twist Drill Co. SPECS: High speed steel.
  12. Cryo-Treated Dovetail Cutter - 74° X .250"
    Item#:
    080-000-272  
    Our Price:
    $59.99
    Description:
    We’ve taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we’ve added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break. Mfg: Brownells SPECS: Cryo-treated, high-speed steel.
View All Power Tools & Accessories »