Brownells Brownells Brownells 75th Anniversary - A Shooting Heritage

Brownells Machinist Accessories

Ready to buy Brownells Machinist Accessories? Look no further than Brownells.com for the best prices and selection. Here, you'll find 16 Brownells Machinist Accessories, the best available, at prices from $9.99 to $203.99. Our excellent selection of gun parts and gunsmith tools, along with our unwavering commitment to the best prices and customer service, has made us the number one online retailer in the industry. We know you'll find our Brownells Machinist Accessories to be everything you expect, so we're proud to offer a 100% satisfaction guarantee. If you're not completely satisfied with your purchase, we'll make it right; whatever it takes. So check out our complete selection of Brownells Machinist Accessories and place your order online or by calling us toll free at 1-800-741-0015. Customer service associates are standing by to answer your questions about our gun parts and gunsmith tools. We're here to help!

Showing 1-12 of 16
  1. Crown Saver™ Lathe Center Cover - Small Crown Saver, 10-Pak
    Item#:
    080-000-379  
    Our Price:
    $29.99
    Description:
    These brass cones take much of the anxiety out of lathe-turning a perfectly good barrel with an already finished crown. Insert a Crown Saver between the muzzle and lathe or mill center before fluting, chambering, polishing, or threading for a muzzle brake, and you can rest assured you won’t harm the rifling or ding the crown. Each brass cone is machined to within .0002" or less concentricity, making using a Crown Saver as accurate as direct barrel contact against the center. With a Crown Saver, you virtually eliminate any chance of swaging the rifling. It stays seated and will not spin in the bore when the barrel is chucked in the lathe. Small fits bores .17 to .45 caliber. Large Mfg: Brownells SPECS: 360 brass. Maximum diameter. Small - .500", Large - .750".
  2. Toolmakers Parallel Clamps - #010 Toolmakers Clamp
    Item#:
    912-362-010  
    Our Price:
    $19.99
    Description:
    Universally used by toolmakers and gunsmiths for close, precision holding of unusual shapes for welding, brazing, scribing, drilling. A must for scope, sight or bolt work. Mfg: Brownells SPECS: #005 - 2'''' (5.1cm) long jaws, 1.285'''' (3.3cm) jaw spread. #010 - 3'''' (7.6cm) long jaws, 2.185'''' (5.5cm) jaw spread. #015 - 4'''' (10.2cm) long jaws, 2.95'''' (7.5cm) jaw spread.
  3. High Speed Countersink - Countersink No. 1, Drill Dia. 3/64", Body Dia. 1/8"
    Item#:
    265-149-501  
    Our Price:
    $10.99
    Description:
    HIGH SPEED COUNTERSINK Mfg: Brownells SPECS: 60° High speed steel.
  4. Crown Saver™ Lathe Center Cover - Large Crown Saver, 3-Pak
    Item#:
    080-000-869  
    Our Price:
    $19.99
    Description:
    These brass cones take much of the anxiety out of lathe-turning a perfectly good barrel with an already finished crown. Insert a Crown Saver between the muzzle and lathe or mill center before fluting, chambering, polishing, or threading for a muzzle brake, and you can rest assured you won’t harm the rifling or ding the crown. Each brass cone is machined to within .0002" or less concentricity, making using a Crown Saver as accurate as direct barrel contact against the center. With a Crown Saver, you virtually eliminate any chance of swaging the rifling. It stays seated and will not spin in the bore when the barrel is chucked in the lathe. Small fits bores .17 to .45 caliber. Large Mfg: Brownells SPECS: 360 brass. Maximum diameter. Small - .500", Large - .750".
  5. Toolmakers Parallel Clamps - #005 Toolmakers Clamp
    Item#:
    912-361-005  
    Our Price:
    $17.99
    Description:
    Universally used by toolmakers and gunsmiths for close, precision holding of unusual shapes for welding, brazing, scribing, drilling. A must for scope, sight or bolt work. Mfg: Brownells SPECS: #005 - 2'''' (5.1cm) long jaws, 1.285'''' (3.3cm) jaw spread. #010 - 3'''' (7.6cm) long jaws, 2.185'''' (5.5cm) jaw spread. #015 - 4'''' (10.2cm) long jaws, 2.95'''' (7.5cm) jaw spread.
  6. Screw Slot Fixture
    Item#:
    080-000-082  
    Our Price:
    $44.99
    Description:
    Heat-treated, steel fixture makes it possible to cut screw slots precisely in the center of the head. Simplifies fitting new screws to a custom gun or recutting/repairing some on a classic. Clamping thumb screw locks the gun screw in the exact position you want; two sets of roller pins guide your saw or slotting file during cutting to produce screw slots with a look of true class. Mfg: Brownells SPECS: Heat-treated steel, black, oxide finish. 2'''' (5.1cm) long, 1¼'''' (3.2cm) wide, 7/8'''' (22.2mm) high. For use with .025'''' thick files and blades.
  7. Lathe Centering Buttons - Lathe Centering Buttons,Pair
    Item#:
    080-641-002  
    Our Price:
    $34.99
    Description:
    Precision-ground and hardened ''''buttons'''' help ensure correct lathe alignment, quickly. Move head and tailstock together with buttons be- tween centers until button faces touch. If O.D. over button joint measures .900'''', (nominal button O.D.) head and tailstock are aligned. If not, the buttons are offset, and so are your headstock and tailstock. Make adjustments and re-measure. Mfg: Brownells SPECS: Steel. .560'''' (14.2mm) long x .900'''' (22.9mm) diameter.
  8. High Speed Countersink - Countersink No. 2, Drill Dia. 5/64", Body Dia. 3/16"
    Item#:
    265-149-502  
    Our Price:
    $9.99
    Description:
    HIGH SPEED COUNTERSINK Mfg: Brownells SPECS: 60° High speed steel.
  9. "v" Blocks - 116 V-Block
    Item#:
    973-340-463  
    Our Price:
    $57.99
    Description:
    The only accurate way to hold barrel and receiver when aligning scope/sight screw holes if a jig is not being used and special drill press vises are not available. Set of 2 V blocks and 2 clamps. Mfg: Brownells SPECS: Cast Iron. Approximately 1½" (3.8cm) sq. x 2" (5.1cm) long.
  10. High Speed Countersink - Countersink No. 3, Drill Dia. 7/64", Body Dia. 1/4"
    Item#:
    265-149-503  
    Our Price:
    $9.99
    Description:
    HIGH SPEED COUNTERSINK Mfg: Brownells SPECS: 60° High speed steel.
  11. Toolmakers Parallel Clamps - #015 Toolmakers Clamp
    Item#:
    912-363-015  
    Our Price:
    $27.99
    Description:
    Universally used by toolmakers and gunsmiths for close, precision holding of unusual shapes for welding, brazing, scribing, drilling. A must for scope, sight or bolt work. Mfg: Brownells SPECS: #005 - 2'''' (5.1cm) long jaws, 1.285'''' (3.3cm) jaw spread. #010 - 3'''' (7.6cm) long jaws, 2.185'''' (5.5cm) jaw spread. #015 - 4'''' (10.2cm) long jaws, 2.95'''' (7.5cm) jaw spread.
  12. High Speed Countersink - Countersink No. 4, Drill Dia. 1/8", Body Dia. 5/16"
    Item#:
    265-149-504  
    Our Price:
    $11.99
    Description:
    HIGH SPEED COUNTERSINK Mfg: Brownells SPECS: 60° High speed steel.
View All Brownells Machinist Accessories »